Cross-linked polyethylene (XLPE) insulating power cable
Cross-linked polyethylene (XLPE) insulating power cable

35KV and down Cross-linked polyethylene(xlpe)insulating power cable

Your present position:35KV and down Cross-linked polyethylene(xlpe)insulating power cable

   For XLPE insulated power cable, either chemical method or physical method is employed to transform the molecular structure of PE from chain into three-dimensional network, i.e. thermoplastic PE is transformed into thermosetting XLPE. After cross-linking, the thermal and mechanical properties of PE have been greatly improved while its excellent electrical property are still retained.
  The maximun permissible operating temperature of the conductor of a XLPE insulated power cable is 90℃

which is higher than that of paper, PVC or PE insulated power cable. The cable has the advantage of simplicity in construction, lightness in weight, convenience in application besides its excellent electrical, thermal, mechanical and anti-chemical corrosion properties. It can also be laid with no limitation of level difference along the route.


The product is manufactured according to the standard of GB12706 or IEC, BS, DIN and ICEA upon request.

The product is suitable for use in power transmission and distribution lines with rated power frequency voltage 3.6/6kV-26/35kV.

Operating characteristics:
1、Rated power-frequency voltage U0/U: 3.6/6kV-26/35kV.
2、Max. Permissible continuous operating temperature of conductor: 90℃.
3、Max. short-circurt temperature of conductor shall not exceed 250℃. (5s maximum duration) .
4、The ambient temperature under installation should not below 0℃.
5、The bending radius of a single-core cable should not less than 20 times of the cable diameter.
  The bending radius of a three-core cable should not less than 15 times of the cable diameter.

Voltage designation:
1、The rated voltage of the cable for a given application shall be suitable for the operating
conditions in the system in which the cable is used, and is expressed in the form of U0/U(Um)kV.
 U0--The rated power-frequency voltage between conductor and earth or metallic screen, for
which the cable designed;
 U --The rated power-frequency voltage between conductors, for which the cable designed;
 Um--The maximum value of the "highest system voltage" for which the equipment may be used.

2、The values ofUo recommened for cables to be used in three-phase systems are listed below.

 System category A-- This category comprises those systems in which any phase conductor that comes in contact with earth or an earth conductor, is disconnected from the system with in I min.
 System category B-- This category comprises those system which, under fault conditions, are operated for a short time with one phase earthed. This period should not exceed I h. For a longer period, not exceeding 8 h on any occasion, can be tolerated. The total duration of earth faults in any year should not exceed 125 h.
 System category C-- This category comprises all syatems which do not fall into categories A and B.

黑人40厘米全进去A片| 99久久国产精品免费消防器材| 国产精品国产精品国产专区不卡| 欧洲人妻丰满AV无码久久不卡| 吃奶呻吟打开双腿做受在线视频| 国产乱人伦精品一区二区|